Dual Function Of Washing And Curing

ELEGOO Mercury XS contains 1 washing station and 1 post-curing station, with the dual function of cleaning and curing to remove uncured resin of 3D printed models and optimized your print quality, making your post-processing simple and efficient.

Elegoo Mercury V2.0 Bundle

● Wash with platform
If the printed model is not removed from the build platform, please install the build platform on the adjustable platform support (the height of the platform support can be adjusted to fit the liquid level in the bucket, the maximum model height is 120 mm), and then adjust the platform bracket to hang on the top of the pillar to start cleaning.

● Wash with bucket
If the printed model has been removed from the build platform, you need to put the model in the cleaning basket (maximum height of the model is 160 mm) and hang the cleaning basket on the top of the pillar to start cleaning the model. Models larger than 15 mm in size can use this cleaning option. Some small models can be cleaned together in a bucket.

360° all-round exposure

2 adjustable L-shaped light bars and increased 4 LED lights under the 360° rotating turntable paired with Fresnel lens to emit UV light with a uniform wavelength of 405nm, ensuring that the model is evenly exposed from all angles.

Large washing volume

With an 7000ml large capacity sealed water tank, you can directly wash large models printed or clean parts in batches, which offers substantial time savings and improves your productivity.

Friendly Tips: Kindly be aware that for the Saturn 4 series, the build platform must be removed for cleaning, which is different from other applicable models. For other models, please refer to the MAXIMUM WASH VOLUME in the specification section and access whether the platform needs to be removed for cleaning based on the model’s height.

UV Protection Cover

The transparent cover of the curing machine can block up to 99.9% of ultraviolet rays to improve resin solidification rate and protect your eyesight during curing process. A safety option automatically switches off the UV lights when you remove the cover.